Search This website
16/11/2010
AIRF's some Achievements
Supply of branded quality cloth for uniform and payment of Stitching Charges and costs of Protective Garments
No.AIRF/32 Dated: November 12, 2010
The Member Mechanical,
Railway Board,
New Delhi
Kind Attn: Shri Sanjeev Handa, Member Mechanical, Railway Board
Dear Sir,
Sub: Supply of branded quality cloth for uniform and payment of Stitching Charges and costs of Protective Garments
AIRF has time and again raised this issue with the Railway Board in various Negotiating Fora, i.e. Railway Board PNM and DC/JCM vide regular agenda items No.16/2005 and 17/2010 (photocopy enclosed) respectively.
While Railways have been spending huge amount of money on the uniforms and protective garments being supplied to the Railwaymen, but the users are not being actually benefitted out of it. It is noticed that even protective garments, such as shoes, gloves, dangry etc. are not supplied as per the stipulated specifications, though it is always claimed by the Railway administrations that the same are of proper quality. The uniforms supplied to the Railwaymen in general and to the Trackmen or to the running staff in particular are of very poor quality and the woolen clothing supplied to them are of worst quality.
It would, therefore, be quite appropriate that the branded quality cloth for the uniform and protective garments as per the standard specifications and Stitching Charges should be paid to all the eligible Railway employees.
An early action in the matter shall be highly appreciated.
Yours faithfully,
(Shiva Gopal Mishra)
General Secretary
DA/As above
DC/JCM Item No.17/2010
Sub: Supply of branded quality cloth for the purpose of uniform to Railway employees
The Railway Board vide their letter No.E(W) 2005/UN1/3 dated 24.04.2007 have issued instructions to the General Managers etc. of the Indian Railways to ensure supply of improved quality cloth to the Railwaymen. The reality in the field is that, quality cloth is not supplied to the Railway employees, resulting in their pride gets lowered.
Railway Board should appreciate that the Railwaymen/women in uniform should appear in such a manner that dignity/image of the Railways should get enhanced.
Staff Side, therefore, suggests that branded cloth, i.e. Raymond, Vimal, etc. may be approved to be supplied to Railway employees, enabling them to use the same and appear on duty as dignified Railway staff.
13/11/2010
Indian Railways Workshops at a glance
12/11/2010
4000 HP EMD Locos 40 Series designed by DLW: Shri S.K.Singh DyCDE (Engine)
| :: EMD :: |
WDG4 - 4000 HP GOODS LOCOMOTIVE
Broad Gauge freight traffic Co-Co diesel electric locomotive with 16 Cylinder 4000 HP engine, AC-AC transmission, microprocessor controlled propulsion and braking with high traction high speed cast steel trucks.
First turned out in 1999 with transfer of technology from General Motor (USA), this locomotive has exceptional fuel efficiency and very low maintenance requirements. It is specifically designed for heavy haul freight traffic requirements of Indian Railways for the 21st Century.
The heart of loco Traction Control Converter uses the GTO devices (obsolete technology). Now the IGBT devices, has been introduced from Oct�2006. It is the latest technology and will be cost effective and gives higher reliability.
The locomotive power has been upgraded to 4500 BCV and the first Loco (Loco No 12114) was manufactured in May-07
| Diesel Engine | Transmission |
| 16 Cylinder 710 G3B, 2 stroke, turbocharged � after cooled Fuel Efficient Engine Injection System � Direct Unit Injector Governor � Woodward Compression Ratio- 16:1 Lube Oil Sump Capacity � 950 Lts | Electrical AC-AC 6 Traction motor ( 3 in parallel per bogie) Suspension � Axle hung / taper roller bearing Gear Ratio � 90:17 |
| Truck | Brakes |
| High adhesion HTSC ( High Tensile Steel Cast) truck of bogie Adhesion � 0.42 | Electronic Air Brake System ( KNORR-NYAB-Computer Controlled Braking) Air , hand , dynamic brake Pure air brake |
| General Characteristic | |
| Installed Power Axle Load Gauge Wheel arrangement Wheel diameter Height Width Overall Length (Over Buffer Beam) Weight Max tractive effort Maximum speed Fuel tank capacity Locomotive Control | 4000 HP 21 T 1676 mm Co-Co 1092 mm 4201 mm 3127 mm 19964 mm 126 T 54 T 100 Kmph 6000 lts EM 2000 with SIBAS-16 Traction Control |
| | |
| WDG4-4000 HP GOODS LOCOMOTIVE | TRACTIVE EFFORT & POWER CHART |
WDP4 - 4000 HP PASSENGER LOCOMOTIVE
State-of-Art, Microprocessor controlled AC-AC, Passenger Locomotive Powered with 16-710G3B 4000HP Turbo charged Two stroke Engine.
Fabricated rigid design Under frame, two stage suspension, High Traction High Speed 3 axle (HTSC) light weight cast truck frame attribute to high adhesion performance.
First turned out in 2003, this locomotive has exceptional fuel efficiency and very low maintenance requirements. It is specifically designed for heavy haul passenger traffic requirements for Indian Railways
The WDP4 fleet is being upgraded by provision of hotel load feature along with power upgradation to 4500 HP. The prototype will be manufactured in the year 2007.
| Diesel Engine | Transmission |
| 16 Cylinder 710 G3B, 2 stroke, turbocharged � after cooled Fuel Efficient Engine Injection System � Direct Unit Injector Governor � Woodward Compression Ratio- 16:1 Lube Oil Sump Capacity � 1073 Lts | Electrical AC-AC 4 Traction motor ( 3 in parallel per bogie) Suspension � Axle hung / taper roller bearing Gear Ratio � 77:17 |
| Truck | Brakes |
| High adhesion HTSC ( High Tensile Steel Cast) truck or bogie Adhesion � 0.42 | Electronic Air Brake System ( KNORR-NYAB-Computer Controlled Braking) Air , hand , dynamic brake with fully blended with automatic brakes Pure air brake |
| General Characteristic | |
| Installed Power Axle Load Gauge Wheel arrangement Wheel diameter Height Width Overall Length (Over Buffer Beam) Weight Max tractive effort Maximum speed Fuel tank capacity Locomotive Control | 4000 HP 19.5 T 1676 mm A-A-I I-A-A 1092 mm 4201mm 3127 mm 19964 mm 117 T 27 T 160 Kmph 4000 lts EM 2000 with SIBAS-16 Traction Control |
| |
|
| WDP4-4000 HP GOODS LOCOMOTIVE | TRACTIVE EFFORT & POWER CHART |
For enquiry contact:
Chief Marketing Manager,
Diesel Locomotive Works,
Varanasi, INDIA, 221 004.
Tel:0542-2642502, Fax-0542-28282828 , Email:
Website:http://diesellocoworks.com
BRIEF HISTORY OF CARRIAGE & WAGON WORKSHOP/KURDUWADI
CENTRAL RAILWAY WORKSHOP – KURDUWADI
VITAL STATISTICS
1. Sanctioned Strength 317 2. On Roll Strength 286 3. No. of Officers 2 4. No. of Supervisors 16 5. Total Area 5.6 acres 6. Covered Area 0.9 acres 7. Township Area 6 sq.m. 8. Power Consumption 9275 units/month 9. Water Consumption 1457 KL/month 10 Annual Budget Rs.37 Crores
MAIN ACTIVITIES
| S/N | Activities | Outturn 09-10 | Target 10-11 |
| 1. | NG Coach POH | 45 | 60 |
BRIEF HISTORY OF CARRIAGE & WAGON WORKSHOP/KURDUWADI
Kurduwadi workshop was established in the year 1930 by the Barshi Light Railway for POH of NG rolling stock. It was taken over by Central Railway in the year 1954. During the restructuring of zonal Railways, the workshop was handed over
to South Central Railway in the year 1966 and remained with them till 1977. The workshop again came into the fold of Central Railway along with Sholapur Division since 02.10.1977.
This workshop was basically established to undertake the POH of NG steam locomotives & Carriage and wagon for Latur-Kurduwadi-Miraj NG section. Later on, the NG rolling stock of the whole Central Railway was taken for POH activities to this workshop. With diminishing NG fleet, the workshop is gearing
up for undertaking rehabilitation of BG wagons.
PME Due Date
Copy of Railway Board’s letter No. 69/H/3/11 dated 06.12.1974
Subject: Implementation of the Recommendations of the Visual Sub-Committee.
6. Periodical re-examination of serving Railway Employees:
6.l. In order to ensure the continued ability of Railway employees in Classes A l, A 2, A 3, B l and B 2 to discharge their duties with safety, they will be required to appear for re-examination at the following stated intervals throughout their service as indicated below:
6.1.1. Classes A l, A 2 and A 3 —At the termination of every period of three years, calculated from the date of appointment until they attain the age of 45 years, and thereafter annually until the conclusion of their service.
Note: (l) The staff in categories A l, A 2 and A 3 should be sent for special medical examination in the interest of safety under the following circumstances unless they have been under the treatment of a Railway Medical Officer.
(a) Having undergone any treatment or operation for eye trouble irrespective of the duration of sickness.
(b) Absence from duty for a period in excess of 90 days.
(2) If any employee in medical category A has been periodically medically examined at any time within one year prior to his attaining the age of 45, his next medical examination should be held one year from the due date of the last medical examination and subsequent medical examination annually thereafter.
If, however, such an employee has been medically examined, at any time earlier, than one year prior to his attaining the age of 45, his next medical examination should be held on the date he attains the age of 45 and subsequent medical examination annually thereafter.
Ammendment: It was ammended in 1993 as below
Age Group PME Due
Age 00-45 every 4yrs
Age 45-55 every 2yrs
Age 55-60 every year
Details:-
As per Rly Bd's Guideline of Medical Exam issued vide LNo. 88/H/5/12 dated 24-01-1993
a) PME would be done at the termination of every period of 4 years from date of appointment / Initial medical Exam till the date of attainment of age of 45 years, every 2 years upto 55 years & there after annual till retirement.
b) Employees who has been periodically examined at any time within 2years prior to his attaining the age of 45years would be examined after 2years from the date of last PME & subsequent PME for every 2years upto 55years age.Of
NRMU 4 you
SMLokhande
6.1.2. Classes B-1 and B-2—On attaining the age of 45 years, and thereafter at the termination of every period of five years.

